View 19-223-S2BHC-A01-2T_1806889.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 1 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai technical data sheet chip led with bi-color(multi-color) 19-223/s2bhc-a01/2t features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? multi-color type. ? pb free. ? the product itself will remain within rohs compliant version. descriptions ? the 19-223 smd taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? backlighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. device selection guide chip type material emitted color lens color s2 algainp brilliant oange bh ingan blue water clear
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 2 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai package outline dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 3 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 25 ma operating temperature topr -40 ~ +85 storage temperature tstg -40 ~ +90 electrostatic discharge (hbm) esd s2: 2000 bh: 150 v power dissipation pd s2: 60 bh: 110 mw peak forward current (duty 1/10 @1khz) i fp s2: 60 bh:100 ma soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec.
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 4 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition luminous intensity iv s2 bh 72.0 36.0 ----- 140.0 72.0 mcd viewing angle 2 1/2 ----- 120 ----- deg peak wavelength p s2 bh ----- 611 468 ----- nm dominant wavelength d s2 bh ----- 605 470 ----- nm spectrum radiation bandwidth s2 bh ----- 17 35 ----- nm forward voltage v f s2 bh 1.7 3.0 2.0 ----- 2.4 3.5 v i f =20ma reverse current i r s2 bh ----- ----- 10 50 a v r =5v notes: 1.tolerance of luminous intensity 10% 2.tolerance of forward voltage 0.1v
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 5 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai s2 bin range of luminous intensity bin min max unit condition q1 72.0 90.0 q2 90.0 112.0 r1 112.0 140.0 mcd i f =20ma bh bin range of luminous intensity bin min max unit condition n2 36.0 45.0 p1 45.0 57.0 p2 57.0 72.0 mcd i f =20ma bin range of forward voltage bin min max unit condition 1 3.00 3.15 2 3.15 3.30 3 3.30 3.50 v i f =20ma notes: 1.tolerance of luminous intensity 10% 2.tolerance of forward voltage 0.1v
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 6 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai typical electro-optical characteristics curves s2
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 7 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai typical electro-optical characteristics curves bh
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 8 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 9 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai carrier tape dimensions: loaded quantity 2000 pcs per reel note: the tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 10 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 5sec. 6 min. 22 pcs. 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 / 85%rh 1000 hrs. 22 pcs. 0/1
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 11 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai precautions for use 1. over-current-proof customer must apply resistors for protection, ot herwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30 deg c or less and 60% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
everlight electronics co.,ltd. 19-223/s2bhc-a01/2t everlight electronics co., ltd. http://www.everlight.com rev. 2 page: 12 of 12 device no:dse-192-a01 prepared date: 13-jun-2006 prepared by: jeff tsai 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http://www.everlight.com

▲Up To Search▲

Price & Availability of 19-223-S2BHC-A01-2T

	To Download 19-223-S2BHC-A01-2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .